Quick Navigation:

Here's the PDF link for those interested, then you can use the jump URL in the table of contents to get to the 'replace SSDs' part. They're listed as 'replace SSD 1' and 'replace SSD 2.' The image in the original post highlights one of the SSDs, but you can clearly see the other slot in the center of the chassis, right below the two RAM slots. Solid-state drives have been shrinking, thanks to the 'gumstick' M.2 format—and, in some cases, they're getting a lot faster. Here's all you need to know to buy the right M.2 SSD, along with.

About M.2 solid state drive (SSD)

M.2 SSD is a solid state drive, known as the Next Generation Form Factor (NGFF), which is especially designed for the small devices like Ultrabooks or Tablets. Here are some features for it.

1. Has smaller size, high-performance, lower consumption.

2. More flexible to use with many board size options.

3. Support PCIe, SATA and USB interface.

Why clone M.2 SSD to M.2 SSD drive?

Here are 3 main reasons in the following why do you want to clone M.2 SSD to another M.2 SSD.

1. Get larger capacity. Typically, the brand computers will install an M.2 SSD drive as boot disk, however, it will be filled up eventually after a long time use. So you may want to clone M.2 SSD to larger M.2 SSD drive to expand disk space.

2. Get better performance. You may find that your computer run smoothly at first, but it will get slower and slower after a period of time. That is because your computer does not have enough space and you need a bigger M.2 SSD.

3. Replace the damaged disk. Owing to many unexpected error, such as, virus, hardware failure, your disk may be corrupted. In this situation, you need to replace the old disk.

The best free M.2 SSD cloner - AOMEI Backupper

To be honest, there are so many M.2 drive duplicator you can find on the Internet, but it’s difficult to distinguish which one is the best. Here, I’d like to recommend you free M.2 cloner - AOMEI Backupper Standard, because of its advantages in the following.

1. Ensure secure boot after cloning M.2 SSD drive.

2. Support cloning all branded M.2 SSD disk, whether PCIe, NVME or SATA, such as, WD M.2 SSD, Samsung M.2 SSD, SanDisk M.2 SSD, etc.

3. Support all the Windows PC operating systems, including Windows7/8/8.1/10/Vista/XP, etc. (All editions, 32-bit and 64-bit).

4. Improve the performance of M.2 SSD disk and its lifespan with the specified feature “SSD Alignment”.

5. Allows you to adjust partition size of the destination disk with “Edit Partition”. This feature is especially useful when you clone disk to larger disk, regardless of disk type.
   

Clone M.2 SSD to M.2 SSD in Windows effortlessly

Below text, we will describe you how to clone M2 SSD with the best free M2 cloner. Before you start to clone, you need do something in the following.

▶ Check if your computer has an M.2 connector. Usually, it’s a horizontal slot about an inch wide labled with “PCIe” or “SATA” or both. If there is, please prepare a M.2 SSD drive, preferably bigger.
▶ Prepare an M.2 clone adapter if you want to clone M 2 SSD with only one slot.
▶ Set the PCI Express X4_3 Slot Bandwidth to “M.2 Mode” and Storage Boot Option Control to UEFI in BIOS, or your computer cannot recognize the M.2 SSD as a new storage device.
▶ Your Windows computer installed the smaller M.2 SSD.
▶ Free download the M.2 drive duplicator - AOMEI Backupper Standard.

Download Freeware

Win 10/8.1/8/7/XP

Secure Download

Now, see below and learn the detailed steps to Clone M.2 SSD to larger M.2 SSD in Windows 7/8/10.

1. Connect the larger M.2 SSD to your computer via M.2 clone adapter and make sure it can be detected. Open the M.2 SSD cloner to its main interface after the installation. Select Clone > Disk Clone in turn.

2. Choose the smaller M.2 SSD drive as the source disk to clone, go to Next.

3. Select the larger M.2 SSD as the destination disk, go Next.

4. Tick SSD Alignment to optimize the performance for M.2 SSD disk and click Start Clone to perform m2 clone safely with M.2 SSD cloner.

★Tips:
✍To make full use of the disk space, you can upgrade to AOMEI Backupper Professional to use 'Edit Partitions'. It has 3 available options: Copy without resizing partitions (free in Standard edition), Add unused space to all partitions, Manually adjust partition size.
✍If you would like to clone all the sectors on smaller M.2 SSD, you have to check Sector by sector clone option.
✍If your SSD is NVMe M.2 SSD, you could use it as the NVMe cloner to clone NVMe to NVMe SSD, clone Windows 10 to NVMe SSD, clone M.2 SATA to M2 NVME, etc.

Besides, You have another way to get everything transferred: AOMEI Backupper allows you to backup M.2 SSD drive to external hard drive, then restore disk image to larger M.2 SSD with WinPE bootable media created by AOMEI Backupper. If you are planing to clone Windows 10 operating system to M.2 SSD without any issues, please upgrade to AOMEI Backupper Professional to try system clone feature.

How to boot from the cloned M.2 SSD after cloning?

1. Remove the mounting screw from the M.2 slot and take out the old M.2 SSD.

2. Plug the new M.2 SSD into the slot and pay attention to the notch.

3. Secure the M.2 SSD with the mounting screw removed earlier. Then, replace the back panel.

4. Start your computer and press the specified key in the initial screen (eg: F2, ESC) to access BIOS, then make sure that the PCI Express X4_3 Slot Bandwidth is M.2 mode and Storage Boot Option Control is UEFI. After that, save the changes and exit BIOS.

Now, you could boot from the cloned M.2 SSD drive and use your computer as normal.

In the end

To clone M 2 to M 2 SSD effortless, you need a great M.2 SSD cloner like AOMEI Backupper. It could not only clone hard drive with secure boot, but also improve the performance of your computer. On its advanced version, you are allowed to adjust the partition size of destination disk and fix the cloned hard drive show wrong size.

If you want to protect unlimited PCs and Servers, you could consider using AOMEI Backupper Technician Plus to enjoy more advanced features, like command line utility to backup/restore/clone, migrate OS to SSD, restore to dissimilar hardware computer, delete old backup images after exceeding the backup number to maintain, etc.

Summary :

As a fast and lightweight storage device, M.2 SSD has attracted a great many people. However, lots of them don’t know how to install M.2 SSD. If you are also trying to find a full guide, this post of MiniTool is what you need.

What You Need to Do Before Installing M.2 SSD

M.2 SSD is lightweight storage that’s specifically designed for the PCI Express physical card layout and connectors. Since it has a smaller form factor and more flexible physical specification, M.2 SSDs attract a great many people.

However, most people are unclear about how to install M.2 SSD. In order to install an M.2 SSD successfully, here are some important things that you should pay attention to.

M.2 Slot Ssd

Intel 660p vs 970 EVO, what’s the difference and which one is better? If you are searching for the answer, you can get a detailed comparison from the post.

# 1. Check Your Motherboard

As you know, M.2 SSDs are commonly used in newer laptops. If you use M.2 SSD on an older computer, it may not be compatible with your motherboard. So, you need to make sure that your motherboard has an M.2 slot before installing M.2 SSD.

To check if you have a compatible M.2 slot, you can consult the manual of your motherboard. If you can’t find the motherboard manual, then you can follow the steps below:

Step 1. Find the motherboard name and model number of your motherboard.

1. Usually, you can find the manufacturer name and model number near one of the four edges of the motherboard on the top side.
2. Alternatively, you can find them through the Windows system information. Press the Win + R keys to open the Run dialog box, and then type msinfo32 in it and hit Enter. Then you can view the motherboard information under the System Summary

Step 2. Check if your motherboard has a compatible M.2 slot.

1. Write down the motherboard information that you have found in the above.
2. Use your Google to search for the motherboard manual.
3. Carefully view the search results. Here you should know your motherboard information.

# 2. Choose a Right SSD

If you have ensured that your motherboard supports the M.2 SSD, now it’s time to choose a suitable SSD. To help you choose a suitable SSD for your laptop, we summarize some useful tips that you can refer to:

• Purchase the right type of M.2 SSD. As you might know, M.2 SSD is mainly identified by the computer through the 2 main technology standards (PCIe and SATA). PCIe is faster than SATA. You need to check if your motherboard slots support PCIe or SATA M.2 SSD. A simple way is to check the notches on the connector. A SATA M.2 SSD has two notches, while a PCIe M.2 SSD has a single notch on the right side. Here it’s recommended that you choose PCIe M.2 SSD because of its faster speed.
• Choose the right physical size. You need to see the physical size of the SSD that your motherboard slot supports. M.2 SSDs are often 22mm width, while their length varies from 30mm to 110mm. For this, you can find the length of your M.2 slot from the motherboard manual.
• Determine the M.2 key. There are 3 types of M.2 keys including B, M, and B+ M key. The M.2 key can also be found from the motherboard manual.

According to the above information, you should know how to choose the right M.2 SSD.

# 3. Get all Necessary Tools

In addition to preparing a right M.2 SSD for your PC, it is also necessary to get all the necessary tools. To open the side panel of your computer, you need to prepare a small flat head screwdriver. Since static electricity can damage your computer memory, so make sure that the entire M.2 installation is performed in an anti-static environment. So, an optional antistatic wrist strap must be prepared.

Have you prepared all the necessary tools? If it is, you can move on to the next part.

How to Install M.2 SSD on Your Windows PC

This section mainly focuses on how to install an M.2 SSD on PC. There are 3 parts to install an NVMe M.2 SSD.

Part 1. Install the M.2 SSD Carefully

Since the M.2 installation is a relatively complex and time-consuming process, please keep reading carefully.

Step 1. Remove all cables and turn off your computer.

To do so, unplug any cables attached and power down off your computer.

Step 2. Remove the side panel of your Windows PC.

1. Using a screwdriver to remove the small screws or latch that is attached to the side panel of your PC.
2. Slide the side panel to detach it from the computer and then lay your computer on its side.

Step 3. Detach the components blocking the M.2 slot. Here you need to take out the components including a graphics card and its brace. To do so, you need to safely remove the screws holding the components.

Get the best deals on Slot Machine Stand when you shop the largest online selection at eBay.com. Free shipping on many items Browse your favorite brands. Bally Slot Machine. Guaranteed Delivery. https://screennin.netlify.app/slot-machine-stands-for-bally.html.

1. Remove the graphics card from your PC. Using the screwdriver to unscrew the parts located in the image.
2. Push down the small latch that’s attached to the graphics card slot and take out the graphics card.

Step 4. Insert the M.2 SSD carefully. After you have removed all blockings among the M.2 slot, you can gently insert the SSD and screw it in the slot.

Step 5. Reattach all components to their original positions. Once you have installed the M.2 SSD in your PC, you can reattach the components including the graphics card, screws, and brace that you take out.

Step 6. Plug all the cables again and turn your computer on. Now, you should have installed the M.2 SSD successfully. You can plug the cables back in and power on your computer.

How to install an M.2 SSD? I believe you have known the full guide.

Part 2. Transfer Your Operating Systems to the M.2 SSD

It is not enough for most people who still want to use the Operating System and data on the previous hard drive. Don’t worry. We will show you how to transfer OS and files to the M.2 SSD. To migrate OS to the SSD, you can utilize a powerful tool – MiniTool Partition Wizard.

With this reliable partition manager, you can transfer OS to the M.2 SSD or copy disk without reinstalling OS. Besides, you can use it to convert MBR to GPT, resize partition, perform disk benchmark, convert NTFS to FAT without data loss, etc.

Crown casino online games. The Player is fully aware that they may play games at Crown Gaming Lounge for money. The individual should also understand that all games are offered for entertainment purposes only, and any decisions or bets made are at the sole discretion of the Player. Online Slots and Casino Games. Welcome to the realm of casino games that are available here at Crown Bingo. With an array of over 400 slots online for our royal players to devour that range from traditional slot games to contemporary Megaways slots - any slot or casino game.

Click on the following button to download this powerful software and install it on your PC. Then move on the steps below:

Step 1. Launch MiniTool Partition Wizard to enter its main interface and click on the Migrate OS to SSD/HD Wizard feature at the left pane.

Step 2. In the pop-up window, select a suitable method to migrate your system disk. Here we take Option A for example. After you select a migration method, click on Next to go on.

Step 3. Select the new M.2 SSD from the disk map to migrate system disk and click on Next to continue.

Step 4. Review the changes that have been made and click on Next to continue. Here we recommend you click on Align partitions to 1MB, which can improve performance for SSD.

Step 5. Click on the Finish button in the pop-up window.

Step 6. Click on Apply to execute the pending operation.

Now, your operating system on the previous hard drive should be migrated to the new M.2 SSD successfully. Alternatively, you can use the Copy Disk Wizard feature to copy the whole disk to the new SSD.

Upgrading RAM can improve game performance. Do you want to upgrade RAM in Acer Nitro 5 gaming laptop? Here is a full guide on Acer Nitro 5 RAM upgrade.

Part 3. Set the M.2 SSD as a Boot Drive

After you have finished the above 2 parts, the M.2 SSD should have been installed on your PC and the OS also has been migrated. The last step is to set the newly installed M.2 SSD as the boot drive. To do so, follow the steps below:

To learn how to beat slot machines, you need to first know how they work. Slots are amongst the most popular casino games throughout the world, both in land-based and online casinos. https://gaygol.netlify.app/slot-machines-slot-machines-how-to-win.html.

Step 1. Enter the BIOS menu.

1. Turn off your computer first.
2. Click on the Power button to restart your computer.
3. Click on the F2 or Delete key before Windows loads on your PC to enter the BIOS menu.

Step 2. Find the Boot settings. Use the left or right arrow key to locate the Boot tab.

Step 3. Change the boot order.

1. Press the Up or Down arrow key on the keyboard to select the new M.2 SSD.
2. Press the “+” or “-” key to put the selected M.2 SSD to the top of the boot list.
3. Press the F10 key to save the boot order changes and exit BIOS.

M.2 Slot Ssd Free Software

Now, restart your computer and your M.2 SSD should be set as the boot drive.

Have a Try Now

How to install an M.2 SSD on Windows 10 PC? Before installing M.2 SSD, make sure that you have read all the important things given in the above. Then you can follow the full guide to finishing the M.2 installation.

If you have any questions about MiniTool Partition Wizard, please send us an e-mail via [email protected]. We also appreciate any endeavor that makes us go further.

How to Install M.2 SSD FAQ

M2 Slot Ssd

M.2 Ssd And Sata Ssd

M.2 Socket Ssd